CO2Maker Foundry
Foam - 1/4
EVA 1/4 CUT
Shared by Maker Foundry
Important safety notice
Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.
Laser Settings
Cut · Vector · Flat SurfacePower
70
Speed
20
Frequency
1000
Thickness
1/4 in
EVA 1/4 CUT | LinkPath: 55w RF/Foam/EVA 1/4 CUT
More Foam settings
Same material on Thunder Laser Bolt Pro 55. Engrave stays the same regardless of thickness; cut changes with thickness.
Engrave (any thickness)
Cut by thickness
1/4 in · P70 S20 · this one
Community Feedback
No votes yet — be the first to report how these settings worked.
Test Grid Generator
A power × speed sweep with this setting (P70 · S20) in the center square — dial it in on scrap.
Machine Context
BrandThunder Laser
ModelBolt Pro 55
Laser typeCO2
Wattage55W
Compare against your own machine before treating these as a starting point.
Material Details
MaterialFoam - 1/4
Color / FinishEVA 1/4 CUT
Size1/4 in
Provenance
Source type
Maker Foundry
Shared by Maker Foundry. A starting point — test on scrap before your final piece, as your machine and material may differ.
License
CC0 (Public Domain)
No rights reserved, free to use.