DiodeCommunity report
Stanley Tumbler
Shared by @GCT Inspection, Inc. on Atomm
Important safety notice
Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.
Laser Settings
Engrave · Vector · RotaryPower
95
Speed
350
LPC
280
Passes
1
Thickness
100mm
defocus
3 mm
After this, do a cleanup with IR using same parameters. May need to remove tumbler handle to focus laser. If your tumbler has a shiny coat to it you may need to do 2 passes with the cleanup (IR) setting.
Community Feedback
No votes yet — be the first to report how these settings worked.
Export
xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).
Sponsored
Shop xTool lasers and UV printers
Every xTool machine in this library, with our discount code.
Code ERIK100: $100 off $1,699+ (or ERIK80: $80 off $999+)
Shop xTool →Machine Context
BrandxTool
ModelF2
Laser typeDiode
Wattage15W
Compare against your own machine before treating these as a starting point.
Material Details
MaterialStanley Tumbler
Size100mm
Shop machine — xTool →
Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)
Provenance
Source type
Community report
Shared by a maker in the community. Helpful for context, but not verified for every setup.