Fiber/InfraredCommunity report
Pla
black
Shared by @rustyamanda035 on Atomm
Important safety notice
Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.
Laser Settings
Engrave · Bitmap · Flat SurfacePower
25
Speed
100
LPC
100
Passes
1
Thickness
3mm
I used my bambu labs p1s to 3d print a book charm in black PLA. Then used a pre loaded image in xtool studio to put on the book. I used the 3w laser in my m2 to achieve this. With power 25% and 100mm with one pass. I did click greyscale.
Community Feedback
No votes yet — be the first to report how these settings worked.
Export
xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).
Sponsored
All American Print Supply
DTF and UV printers, supplies and xTool machines.
Code FOUNDRY: 5% off, machines included
Shop AAPS →Machine Context
BrandxTool
ModelM2
Laser typeFiber/Infrared
Wattage3W
Compare against your own machine before treating these as a starting point.
Material Details
MaterialPla
Color / Finishblack
BrandGeneric 3d printed Pla with bambu labs
Size3mm
Shop machine — xTool →
Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)
Provenance
Source type
Community report
Shared by a maker in the community. Helpful for context, but not verified for every setup.