DiodeCommunity report
beige MDF board
Shared by @mitjablazinc on Atomm
Important safety notice
Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.
Laser Settings
Cut · Vector · Flat SurfacePower
1
Speed
16
Passes
1
Thickness
4mm
I used a 4mm thick MDF board and cut it with xTool S1 - 40W. Settings were: 100% power and speed 7mm/s. It cut through the board nicely.
Community Feedback
No votes yet — be the first to report how these settings worked.
Export
xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).
Sponsored
Shop xTool lasers and UV printers
Every xTool machine in this library, with our discount code.
Code ERIK100: $100 off $1,699+ (or ERIK80: $80 off $999+)
Shop xTool →Machine Context
BrandxTool
ModelS1
Laser typeDiode
Wattage40W
Compare against your own machine before treating these as a starting point.
Material Details
Materialbeige MDF board
Size4mm
Shop machine — xTool →
Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)
Provenance
Source type
Community report
Shared by a maker in the community. Helpful for context, but not verified for every setup.