CO2Community report
Mirrored Acrylic - 3mm
Shared by Community — To Be Tested
Important safety notice
Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.
Laser Settings
Cut · VectorPower
100
Speed
18%
Passes
1
Frequency
100%
Thickness
3mm
scale
Epilog % (Speed / Power / Frequency)
derived from
Epilog Acrylic cutting 1/8"
to be tested
yes
⚠️ TO BE TESTED — not yet run on this machine. Derived from Epilog Acrylic cutting 1/8". Speed and Power are Epilog % — not mm/s. Run a test grid on scrap and correct this entry. Cut mirror-side down so the beam does not scatter off the backing.
Community Feedback
No votes yet — be the first to report how these settings worked.
Export
LightBurn machine — exports as .clb, no retyping.
Sponsored
Shop xTool lasers and UV printers
Every xTool machine in this library, with our discount code.
Code ERIK100: $100 off $1,699+ (or ERIK80: $80 off $999+)
Shop xTool →Test Grid Generator
A power × speed sweep with this setting (P100 · S18) in the center square — dial it in on scrap.
Machine Context
BrandEpilog
ModelFusion Pro 48
Laser typeCO2
Wattage120W
Compare against your own machine before treating these as a starting point.
Material Details
MaterialMirrored Acrylic - 3mm
Size3mm
Provenance
Source type
Community report
Shared by a maker in the community. Helpful for context, but not verified for every setup.
License
CC0 (Public Domain)
No rights reserved, free to use.