DiodeCommunity report
Albasia
brown
Shared by @alexandruandrei.aa on Atomm
Important safety notice
Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.
Laser Settings
Cut · Vector · Flat SurfacePower
90
Speed
10
Passes
1
Thickness
4mm
Optimized cutting settings for 4mm Albasia plywood purchased from Dedeman. Due to slight variations in core density and glue consistency within the material, higher speeds (above 10mm/s) occasionally result in incomplete cuts in a single pass.
These settings (10mm/s at 90% power, single pass) ensure a clean, reliable, and consistent cut all the way through the material without scorching or burning the edges.
Community Feedback
No votes yet — be the first to report how these settings worked.
Export
xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).
Sponsored
All American Print Supply
DTF and UV printers, supplies and xTool machines.
Code FOUNDRY: 5% off, machines included
Shop AAPS →Machine Context
BrandxTool
ModelM1 Ultra
Laser typeDiode
Wattage20W
Compare against your own machine before treating these as a starting point.
Material Details
MaterialAlbasia
Color / Finishbrown
BrandDedeman
Size4mm
Shop machine — xTool →
Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)
Provenance
Source type
Community report
Shared by a maker in the community. Helpful for context, but not verified for every setup.