DiodeCommunity report
dark gray slate coaster
gray
Shared by @pfiddler82 on Atomm
Important safety notice
Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.
Laser Settings
Engrave · Bitmap · Flat SurfacePower
30
Speed
240
LPC
80
Passes
1
Thickness
8.9mm
Gray slate coaster, no pretreatment this time. Engraved at XTool's recommended settings for the material. Then poly after. They turned out better than any I've done in the past.
Community Feedback
No votes yet — be the first to report how these settings worked.
Export
xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).
Sponsored
Shop xTool lasers and UV printers
Every xTool machine in this library, with our discount code.
Code ERIK100: $100 off $1,699+ (or ERIK80: $80 off $999+)
Shop xTool →Machine Context
BrandxTool
ModelM2
Laser typeDiode
Wattage20W
Compare against your own machine before treating these as a starting point.
Material Details
Materialdark gray slate coaster
Color / Finishgray
Size8.9mm
Shop machine — xTool →
Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)
Provenance
Source type
Community report
Shared by a maker in the community. Helpful for context, but not verified for every setup.