DiodeCommunity report
figured redwood Venier
brown
Shared by @tvacha on Atomm
Important safety notice
Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.
Laser Settings
Cut · Vector · Flat SurfacePower
48
Speed
170
Passes
1
Thickness
0.6mm
the material test looks inconsistent but also looked that way on same sample when done again. I went with 48% 170 mm/s 1 pass for a cut. the veneer was held about 3 mm above the honeycomb. I did this test to attempt marquetry on veneer.
Community Feedback
No votes yet — be the first to report how these settings worked.
Export
xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).
Sponsored
All American Print Supply
DTF and UV printers, supplies and xTool machines.
Code FOUNDRY: 5% off, machines included
Shop AAPS →Machine Context
BrandxTool
ModelS1
Laser typeDiode
Wattage40W
Compare against your own machine before treating these as a starting point.
Material Details
Materialfigured redwood Venier
Color / Finishbrown
Size0.6mm
Shop machine — xTool →
Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)
Provenance
Source type
Community report
Shared by a maker in the community. Helpful for context, but not verified for every setup.