DiodeCommunity report
Can glass
Shared by @leidyhdz on Atomm
Important safety notice
Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.
Laser Settings
Engrave · Vector · RotaryPower
90
Speed
190
LPC
130
Passes
1
Thickness
3mm
defocus
3 mm
Engraved a clear can glass using the xTool S1 40W with the rotary attachment. I used 190 mm/s speed, 90% power, and 1 pass. The glass was prepared with a coating before engraving to help the blue diode laser mark the clear surface. The engraving came out clean, detailed, and consistent around the glass. These settings worked well for detailed designs on clear can glass.
Community Feedback
No votes yet — be the first to report how these settings worked.
Export
xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).
Sponsored
All American Print Supply
DTF and UV printers, supplies and xTool machines.
Code FOUNDRY: 5% off, machines included
Shop AAPS →Machine Context
BrandxTool
ModelS1
Laser typeDiode
Wattage40W
Compare against your own machine before treating these as a starting point.
Material Details
MaterialCan glass
Size3mm
Shop machine — xTool →
Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)
Provenance
Source type
Community report
Shared by a maker in the community. Helpful for context, but not verified for every setup.