CO2Vendor

Plastic - Two Layer Engravable - 1.5mm

Shared by Supplier Import

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Cut · Vector

Power

Speed

20%

Passes

Frequency

100%

Thickness

1.5mm

scale

Epilog % (Speed / Power / Frequency)

Epilog's published Suggested Material Settings (Fusion Pro, 120 watt CO2 column). Speed and Power are Epilog % — not mm/s. Starting point only: test on scrap.

More Plastic - Two Layer Engravable settings

Same material on Epilog Fusion Pro 48. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)

P20 S100%P35 S100%

Cut by thickness

1.5mm · P40 S20% · this one

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

LightBurn machine — exports as .clb, no retyping.

Test Grid Generator

A power × speed sweep with this setting (P40 · S20) in the center square — dial it in on scrap.

Machine Context

BrandEpilog

ModelFusion Pro 48

Laser typeCO2

Wattage120W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialPlastic - Two Layer Engravable - 1.5mm

Size1.5mm

Provenance

Source type

Vendor

Shared from a supplier or manufacturer reference. Useful for context, but not proof it will match your machine or material.

License

CC0 (Public Domain)