DiodeCommunity report
vegetable tan leather
brown
Shared by @macthenoo on Atomm
Important safety notice
Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.
Laser Settings
Engrave · Bitmap · Flat SurfacePower
52
Speed
128
LPC
100
Passes
1
Thickness
3mm
Veg tan leather keyring blanks engraved on the M2. Not sure how to use batch yet but just copied and pasted the design onto each blank. Set the power at 52% and the speed at 128mm/s , 100 lines. I used the clean cut panel and taped the blanks down. Use the desktop air purifier, leather doesn't smell good when burning...
Community Feedback
No votes yet — be the first to report how these settings worked.
Export
xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).
Sponsored
Shop xTool lasers and UV printers
Every xTool machine in this library, with our discount code.
Code ERIK100: $100 off $1,699+ (or ERIK80: $80 off $999+)
Shop xTool →Machine Context
BrandxTool
ModelM2
Laser typeDiode
Wattage20W
Compare against your own machine before treating these as a starting point.
Material Details
Materialvegetable tan leather
Color / Finishbrown
Brandbought from Identity Leather Craft. sales@theidentitystore.co.uk
Size3mm
Shop machine — xTool →
Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)
Provenance
Source type
Community report
Shared by a maker in the community. Helpful for context, but not verified for every setup.