UVCommunity report
Glass Cabochon 18mm x 25mm oval
Shared by @camador42 on Atomm
Important safety notice
Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.
Laser Settings
Emboss · Bitmap · EmbossmentPower
100
Speed
200
LPC
500
Passes
1
Thickness
4mm
I used an oval glass cabochon, 18mm x 25mm, from a ring. The glass must be removed from the ring first, and it should be processed flat side up. There are 50 layers processed at 500 LPC, Engraving Angle 30, Descending 0.03 every 1 layer.
Community Feedback
No votes yet — be the first to report how these settings worked.
Export
xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).
Sponsored
All American Print Supply
DTF and UV printers, supplies and xTool machines.
Code FOUNDRY: 5% off, machines included
Shop AAPS →Machine Context
BrandxTool
ModelF2 Ultra UV
Laser typeUV
Wattage5W
Compare against your own machine before treating these as a starting point.
Material Details
MaterialGlass Cabochon 18mm x 25mm oval
Size4mm
Shop machine — xTool →
Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)
Provenance
Source type
Community report
Shared by a maker in the community. Helpful for context, but not verified for every setup.