Maker Foundry
304 Stainless Steel 16ga/1.5mm test grid
Community report

304 Stainless Steel 16ga/1.5mm

Shared by @Dom's Workshop on Atomm

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Cut · Vector · Fixture
Power
100
Speed
40
Passes
1
Thickness
1.5mm
Very little dross on small parts under 3 inches squared. Follow height @ 0.016 inches with 2mm cutting nozzle.

More 304 Stainless Steel 16ga/1.5mm settings

Same material on xTool MetalFab. Engrave stays the same regardless of thickness; cut changes with thickness.

Cut by thickness
1.5mm · P100 S40 · this one1.5mm · P100 S35

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).

Sponsored
Shop xTool lasers and UV printers

Every xTool machine in this library, with our discount code.

Code ERIK100: $100 off $1,699+ (or ERIK80: $80 off $999+)

Shop xTool →

Machine Context

BrandxTool
ModelMetalFab
Wattage1200W

Compare against your own machine before treating these as a starting point.

Material Details

Material304 Stainless Steel 16ga/1.5mm
Size1.5mm
Shop machine — xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Provenance

Source type
Community report

Shared by a maker in the community. Helpful for context, but not verified for every setup.

Source

Shared by @Dom's Workshop in Atomm, xTool's community
View the original post →