CO2Community report
Olive Wood Comfort Cross
Shared by @Timber Trails on Atomm
Important safety notice
Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.
Laser Settings
Engrave · Vector · Flat SurfacePower
20
Speed
500
LPC
180
Passes
2
Thickness
13.72mm
defocus
8 mm
Simple engrave to personalize Olive Wood crosses with names and Jesus on the crucifix. Base setting is 20% power / 500mm/s speed / 2 passes / 190 LPCM / 25% airflow. Can use an 8mm Defocus to get a deeper dark color or bump up the power to 22%
Community Feedback
1 maker reported. Sign in to add yours.
Export
xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).
Sponsored
All American Print Supply
DTF and UV printers, supplies and xTool machines.
Code FOUNDRY: 5% off, machines included
Shop AAPS →Machine Context
BrandxTool
ModelP3
Laser typeCO2
Wattage80W
Compare against your own machine before treating these as a starting point.
Material Details
MaterialOlive Wood Comfort Cross
Size13.72mm
Shop machine — xTool →
Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)
Provenance
Source type
Community report
Shared by a maker in the community. Helpful for context, but not verified for every setup.