DiodeCommunity report
aspen plywood board
Shared by @marisha_white on Atomm
Important safety notice
Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.
Laser Settings
Engrave · Vector · Flat SurfacePower
60
Speed
120
LPC
100
Passes
1
Thickness
6.25mm
Chalk gray painted wood slats formed together to make a plaque. Hangs on a wall or can be sat on a table with minor modifications. One pass, engraving. This is the first step as this is NOT the finished product. The idea is to have a 4x6 photo attached using the method of your choosing of a loved one that is loved and missed dearly.
Community Feedback
No votes yet — be the first to report how these settings worked.
Export
xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).
Sponsored
Shop xTool lasers and UV printers
Every xTool machine in this library, with our discount code.
Code ERIK100: $100 off $1,699+ (or ERIK80: $80 off $999+)
Shop xTool →Machine Context
BrandxTool
ModelM2
Laser typeDiode
Wattage10W
Compare against your own machine before treating these as a starting point.
Material Details
Materialaspen plywood board
BrandHello Hobby
Size6.25mm
Shop machine — xTool →
Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)
Provenance
Source type
Community report
Shared by a maker in the community. Helpful for context, but not verified for every setup.