CO2Vendor

Wood - 9.5mm

Shared by Supplier Import

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Cut · Vector

Power

100

Speed

Passes

Frequency

10%

Thickness

9.5mm

scale

Epilog % (Speed / Power / Frequency)

Epilog's published Suggested Material Settings (Fusion Pro, 120 watt CO2 column). Speed and Power are Epilog % — not mm/s. Starting point only: test on scrap. Multiple passes with Color Mapping let you step focus down between passes.

More Wood settings

Same material on Epilog Fusion Pro 48. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)

P100 S60%P100 S90%P100 S85%P100 S100%

Cut by thickness

3mm · P100 S20%6mm · P100 S10%9.5mm · P100 S5% · this one12mm · P100 S2%

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

LightBurn machine — exports as .clb, no retyping.

Test Grid Generator

A power × speed sweep with this setting (P100 · S5) in the center square — dial it in on scrap.

Machine Context

BrandEpilog

ModelFusion Pro 48

Laser typeCO2

Wattage120W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialWood - 9.5mm

Size9.5mm

Provenance

Source type

Vendor

Shared from a supplier or manufacturer reference. Useful for context, but not proof it will match your machine or material.

License

CC0 (Public Domain)