CO2Vendor

Stainless Steel with Cermark

Shared by Supplier Import

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Engrave · Bitmap

Power

100

Speed

55%

DPI

500

Passes

scale

Epilog % (Speed / Power / Frequency)

Epilog's published Suggested Material Settings (Fusion Pro, 120 watt CO2 column). Speed and Power are Epilog % — not mm/s. Starting point only: test on scrap. Cermark / CerMark LMM coating required — CO2 will not mark bare steel.

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

LightBurn machine — exports as .clb, no retyping.

Test Grid Generator

A power × speed sweep with this setting (P100 · S55) in the center square — dial it in on scrap.

Machine Context

BrandEpilog

ModelFusion Pro 48

Laser typeCO2

Wattage120W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialStainless Steel with Cermark

Provenance

Source type

Vendor

Shared from a supplier or manufacturer reference. Useful for context, but not proof it will match your machine or material.

License

CC0 (Public Domain)