DiodeCommunity report
Any2 x4 resawn and sanded 2x4 Pine Lumber
Shared by @raidernation4ever on Atomm
Important safety notice
Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.
Laser Settings
Cut · Vector · Flat SurfacePower
90
Speed
8
Passes
3
Thickness
9mm
do not walk away from the machine when using borax, it's a surface burn, so that wood won't catch fire but you may get a little flame as the borax burns.
Community Feedback
No votes yet — be the first to report how these settings worked.
Export
xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).
Sponsored
Shop xTool lasers and UV printers
Every xTool machine in this library, with our discount code.
Code ERIK100: $100 off $1,699+ (or ERIK80: $80 off $999+)
Shop xTool →Machine Context
BrandxTool
ModelM2
Laser typeDiode
Wattage20W
Compare against your own machine before treating these as a starting point.
Material Details
MaterialAny2 x4 resawn and sanded 2x4 Pine Lumber
Size9mm
Shop machine — xTool →
Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)
Provenance
Source type
Community report
Shared by a maker in the community. Helpful for context, but not verified for every setup.