DiodeCommunity report
Red on White Romark Engraving Material
red
Shared by @adam1891 on Atomm
Important safety notice
Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.
Laser Settings
Engrave · Vector · Flat SurfacePower
96
Speed
6000
LPC
200
Passes
1
Thickness
0.06mm
defocus
3 mm
This setting if for engraving red on white Romark. It can be one of the more difficult to get good results with. I use the 2 passes at 6500 mm/s speed in one layer and do a clean up pass of 6000 mm/s for a clean up pass. Select Processing path - User Defined - By layer.
Community Feedback
No votes yet — be the first to report how these settings worked.
Export
xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).
Sponsored
Shop xTool lasers and UV printers
Every xTool machine in this library, with our discount code.
Code ERIK100: $100 off $1,699+ (or ERIK80: $80 off $999+)
Shop xTool →Machine Context
BrandxTool
ModelF2 Ultra
Laser typeDiode
Wattage40W
Compare against your own machine before treating these as a starting point.
Material Details
MaterialRed on White Romark Engraving Material
Color / Finishred
BrandRomark
Size0.06mm
Shop machine — xTool →
Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)
Provenance
Source type
Community report
Shared by a maker in the community. Helpful for context, but not verified for every setup.