DiodeCommunity report
Clear Acrylic Sheet
Shared by @Dan Bautista on Atomm
Important safety notice
Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.
Laser Settings
Engrave · Vector · Flat SurfacePower
70
Speed
2000
LPC
200
Passes
1
Thickness
4mm
defocus
3 mm
I highly recommend to not use any kind of marking spray or paint on this project- I found that with these sheets, a black piece of card stock in the back works best. Settings took some fine tuning, 60-70% BL at 2000 mm/s suffices.
Community Feedback
No votes yet — be the first to report how these settings worked.
Export
xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).
Sponsored
All American Print Supply
DTF and UV printers, supplies and xTool machines.
Code FOUNDRY: 5% off, machines included
Shop AAPS →Machine Context
BrandxTool
ModelF2
Laser typeDiode
Wattage15W
Compare against your own machine before treating these as a starting point.
Material Details
MaterialClear Acrylic Sheet
Size4mm
Shop machine — xTool →
Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)
Provenance
Source type
Community report
Shared by a maker in the community. Helpful for context, but not verified for every setup.