Fiber/InfraredCommunity report
Glass Holiday Ornament
purple
Shared by @martinez1595 on Atomm
Important safety notice
Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.
Laser Settings
Engrave · Vector · Flat SurfacePower
100
Speed
1000
LPC
300
Passes
1
Thickness
2mm
This is a glass holiday ornament. Note: shatterproof ornaments will not work. You can use a jig to hold the ornament in place or attach to a rotary tool. i used the F1 - Fiber IR 2W for this project. The same setting apply to the F2. Autofocus the ornament then manually de-focus by 1-2mm. If the coating has not removed for a single pass run it again.
Community Feedback
No votes yet — be the first to report how these settings worked.
Export
xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).
Sponsored
All American Print Supply
DTF and UV printers, supplies and xTool machines.
Code FOUNDRY: 5% off, machines included
Shop AAPS →Machine Context
BrandxTool
ModelF1
Laser typeFiber/Infrared
Wattage2W
Compare against your own machine before treating these as a starting point.
Material Details
MaterialGlass Holiday Ornament
Color / Finishpurple
Size2mm
Shop machine — xTool →
Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)
Provenance
Source type
Community report
Shared by a maker in the community. Helpful for context, but not verified for every setup.