DiodeCommunity report
Orange powder coated tumbler
orange
Shared by @JennuineImpressions on Atomm
Important safety notice
Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.
Laser Settings
Engrave · Bitmap · RotaryPower
80
Speed
250
LPC
200
Passes
1
After array testing, I ran this at 80 power and, because it wasn't as detailed as some of my other engravings, I increased the speed to 250.
Community Feedback
No votes yet — be the first to report how these settings worked.
Export
xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).
Sponsored
Shop xTool lasers and UV printers
Every xTool machine in this library, with our discount code.
Code ERIK100: $100 off $1,699+ (or ERIK80: $80 off $999+)
Shop xTool →Machine Context
BrandxTool
ModelM2
Laser typeDiode
Wattage10W
Compare against your own machine before treating these as a starting point.
Material Details
MaterialOrange powder coated tumbler
Color / Finishorange
Shop machine — xTool →
Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)
Provenance
Source type
Community report
Shared by a maker in the community. Helpful for context, but not verified for every setup.