Fiber/InfraredCommunity report
PETG-HF Black, Bambu Lab
black
Shared by @Ryan The Mast on Atomm
Important safety notice
Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.
Laser Settings
Engrave · Vector · Flat SurfacePower
60
Speed
1200
LPC
100
Passes
1
Thickness
1.75mm
defocus
7 mm
Using an xTool F2 with the 5W IR. Setting Works well; this is intended to be about as high-contrast as you can get it without getting too yellow, brown, or burnt.
Community Feedback
No votes yet — be the first to report how these settings worked.
Export
xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).
Sponsored
All American Print Supply
DTF and UV printers, supplies and xTool machines.
Code FOUNDRY: 5% off, machines included
Shop AAPS →Machine Context
BrandxTool
ModelF2
Laser typeFiber/Infrared
Wattage5W
Compare against your own machine before treating these as a starting point.
Material Details
MaterialPETG-HF Black, Bambu Lab
Color / Finishblack
BrandBambu Lab
Size1.75mm
Shop machine — xTool →
Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)
Provenance
Source type
Community report
Shared by a maker in the community. Helpful for context, but not verified for every setup.