UVCommunity report
birch wood toothpick
Shared by @My 3D Delights on Atomm
Important safety notice
Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.
Laser Settings
Engrave · Vector · Flat SurfacePower
85
Speed
300
LPC
300
Passes
6
defocus
1 mm
I used my F2 Ultra UV to engrave some toothpicks to personalise them. These are small enough to slip inside a birthday or anniversary card as an extra little surprise. I found that multiple passes at higher speed gave a more uniform engraving.
Community Feedback
No votes yet — be the first to report how these settings worked.
Export
xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).
Sponsored
Shop xTool lasers and UV printers
Every xTool machine in this library, with our discount code.
Code ERIK100: $100 off $1,699+ (or ERIK80: $80 off $999+)
Shop xTool →Machine Context
BrandxTool
ModelF2 Ultra UV
Laser typeUV
Wattage5W
Compare against your own machine before treating these as a starting point.
Material Details
Materialbirch wood toothpick
BrandAny kitten/hardware store
Shop machine — xTool →
Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)
Provenance
Source type
Community report
Shared by a maker in the community. Helpful for context, but not verified for every setup.