Fiber/InfraredCommunity report
.8mm Brass H62
Shared by @EmboMarrok on Atomm
Important safety notice
Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.
Laser Settings
Cut · Vector · Flat SurfacePower
100
Speed
1000
Passes
17
Frequency
65 kHz
Pulse Width
500
Thickness
0.8mm
Tested successfully on 0.8 mm H62 brass. Actual results may vary with alloy, sheet flatness, focus, and part size. For larger shapes, additional passes may be required.
Community Feedback
No votes yet — be the first to report how these settings worked.
Export
xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).
Sponsored
All American Print Supply
DTF and UV printers, supplies and xTool machines.
Code FOUNDRY: 5% off, machines included
Shop AAPS →Machine Context
BrandxTool
ModelF2 Ultra (Single)
Laser typeFiber/Infrared
Wattage60W
Compare against your own machine before treating these as a starting point.
Material Details
Material.8mm Brass H62
BrandStorkFly' Store (Trader)
Size0.8mm
Shop machine — xTool →
Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)
Provenance
Source type
Community report
Shared by a maker in the community. Helpful for context, but not verified for every setup.