Printable Holographic Confetti Sticker Paper

Shared by @nativisdesigns on Atomm

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Cut · Vector · Combined (free)

Power

Speed

Passes

Thickness

0.05mm

Using the M2 print and cut with 10 Watt laser I created stickers using the Atomm creative sticker generator. I found that the setting of 20power and 5 speed for the cutting worked perfectly on the holographic vinyl sticker paper. This allowed me to cut all the way through the backing so that I could have individual stickers and not just peel and stick from the sheet. If you want them to stay intact with the sheet I found 15 power worked just fine.

More Printable Holographic Confetti Sticker Paper settings

Same material on xTool M2. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)

0.26mm · P78 S453

Cut by thickness

0.05mm · P20 S5 · this one

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).

Machine Context

BrandxTool

ModelM2

Laser typeDiode

Wattage10W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialPrintable Holographic Confetti Sticker Paper

BrandXtool

Size0.05mm

SupplierxTool

Buy this material →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Shop machine — xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Provenance

Source type

Community report

Shared by a maker in the community. Helpful for context, but not verified for every setup.

Source

Shared by @nativisdesigns in Atomm, xTool's community

View the original post →