Maker Foundry

Pick your machine

2 machines
MetalFab
16 settings
X1
9 settings
Cut · Flat Surface 1Engrave · Flat Surface 4Score · Flat Surface 4
Fiber/InfraredVendor

1/32"(0.5mm) C28000 Brass

Shared by xTool (vendor)

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Engrave · Bitmap · Flat Surface
Power
40
DPI
350
Passes
1
Frequency
300
Thickness
0.5mm
dot time
100 µs
bitmap mode
Jarvis

More 1/32"(0.5mm) C28000 Brass settings

Same material on xTool X1. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)
0.5mm · P40 S? · this one0.5mm · P70 S?0.5mm · P30 S20000.5mm · P50 S1000
Cut by thickness
0.5mm · P100 S1500

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).

Sponsored
All American Print Supply

DTF and UV printers, supplies and xTool machines.

Code FOUNDRY: 5% off, machines included

Shop AAPS →

Machine Context

BrandxTool
ModelX1
Also works inBatch (same design), Batch (variable data), Jig
Laser typeFiber/Infrared
Wattage60W

Compare against your own machine before treating these as a starting point.

Material Details

Material1/32"(0.5mm) C28000 Brass
BrandxTool
Size0.5mm
SupplierxTool
Buy this material →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Shop machine — xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Provenance

Source type
Vendor

Shared from a supplier or manufacturer reference. Useful for context, but not proof it will match your machine or material.

Source

xTool material library

xTool's tested settings, shared here with xTool's permission.