Pick your machine
15 machines have 1/2"(12mm) Pine Ponderosa Plywood settings
1/2"(12mm) Pine Ponderosa Plywood
Shared by xTool (vendor)
Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.
Laser Settings
Engrave · Bitmap · Flat SurfaceMore 1/2"(12mm) Pine Ponderosa Plywood settings
Same material on xTool P2S. Engrave stays the same regardless of thickness; cut changes with thickness.
Community Feedback
No votes yet — be the first to report how these settings worked.
Export
xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).
Every xTool machine in this library, with our discount code.
Code ERIK100: $100 off $1,699+ (or ERIK80: $80 off $999+)
Shop xTool →Machine Context
Compare against your own machine before treating these as a starting point.
Material Details
Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)
Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)
Provenance
Shared from a supplier or manufacturer reference. Useful for context, but not proof it will match your machine or material.
Source
xTool's tested settings, shared here with xTool's permission.