DiodeVendor

Plywood - Generic

Shared by Supplier Import

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Cut · Vector

Power

100

Speed

4.16667 mm/s

More Plywood - Generic settings

Same material on Darkly Labs Emblaser 2. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)

P32 S83.3333 mm/s

Cut by thickness

P100 S4.16667 mm/s · this oneP85 S11.6667 mm/s P85 S16.6667 mm/s

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

LightBurn machine — exports as .clb, no retyping.

Test Grid Generator

A power × speed sweep with this setting (P100 · S4.16667) in the center square — dial it in on scrap.

Machine Context

BrandDarkly Labs

ModelEmblaser 2

Laser typeDiode

Wattage10W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialPlywood - Generic

SupplierDarkly Labs

Provenance

Source type

Vendor

Shared from a supplier or manufacturer reference. Useful for context, but not proof it will match your machine or material.

License

CC0 (Public Domain)