Maker Foundry

Pick your machine

12 machines
D1
9 settings
D1 Pro
12 settings
D1 Pro 2.0
12 settings
F1
9 settings
F1 Lite
5 settings
F1 Ultra
6 settings
M1
6 settings
M1 Ultra
6 settings
P2
4 settings
P2S
4 settings
P3
1 setting
S1
11 settings
Velvet test grid
CO2Community report

Velvet

Shared by @hester.stephanie on Atomm

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Cut · Vector · Flat Surface
Power
45
Speed
50
Passes
1
Thickness
1mm
The material is sequined fabric on velvet. It works best if the cut is made on the back of the fabric. I add Heat n Bond lite to the back of the fabric. I use this for embroidery applique.

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).

Sponsored
Shop xTool lasers and UV printers

Every xTool machine in this library, with our discount code.

Code ERIK100: $100 off $1,699+ (or ERIK80: $80 off $999+)

Shop xTool →

Machine Context

BrandxTool
ModelP3
Laser typeCO2
Wattage80W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialVelvet
Size1mm
SupplierxTool
Buy this material →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Shop machine — xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Provenance

Source type
Community report

Shared by a maker in the community. Helpful for context, but not verified for every setup.

Source

Shared by @hester.stephanie in Atomm, xTool's community
View the original post →