Pick your machine

14 machines have 1/8"(3mm) Red Translucent Glossy Acrylic settings

12 settings

Engrave · Flat Surface 2 Score · Flat Surface 1

DiodeVendor

1/8"(3mm) Red Translucent Glossy Acrylic

Shared by xTool (vendor)

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Engrave · Vector · Flat Surface

Power

Speed

100

LPC

200

Passes

Thickness

3mm

More 1/8"(3mm) Red Translucent Glossy Acrylic settings

Same material on xTool F1. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)

3mm · P85 S100 · this one3mm · P80 S?

Score

3mm · P85 S70

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).

Machine Context

BrandxTool

ModelF1

Same settings onF1 Lite, D1 Pro 2.0, D1 Pro, D1

Also works inBaseplate Removed, Embossment, Slide Extension, Slide Extension (Super)

Laser typeDiode

Wattage10W

Compare against your own machine before treating these as a starting point.

Material Details

Material1/8"(3mm) Red Translucent Glossy Acrylic

BrandxTool

Size3mm

SupplierxTool

Buy this material →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Shop machine — xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Provenance

Source type

Vendor

Shared from a supplier or manufacturer reference. Useful for context, but not proof it will match your machine or material.

Source

xTool material library

xTool's tested settings, shared here with xTool's permission.