Blank Commemorative Brass Coins

I recently embossed a family crest on one of the xTool Brass Coin Blanks. See attached photo of finished product. I wanted an antiqued bronze look, so I did not do a final "cleaning pass". I used the recommended settings in the xTool Ultra materials list with one exception. The lines per mm default to 300. Using that setting this coin would have taken almost 8.5 hours to process. I adjusted the setting to 200, which decreased the total time to 5.25 hours. I believe the result is nice, since I wanted an antique look. I cleaned the coin with a gray scotch brite pad. Cleaned with dish soap and then when dry, applied Meguires Carnuba Car Wax to give it a soft smooth feel.