CO2Community report

ABS Sheet

Shared by Community Import

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Engrave · Bitmap

Power

Speed

171.5 mm/s

Line Interval

0.085

Community-aggregated import — a starting point only. Test on scrap first, and report it if the setting doesn't work. Darkness guide (speed 171.5, line interval 0.085) — darkest first: 90%→P90 80%→P77 70%→P71 60%→P58 50%→P51 40%→P39 30%→P32 20%→P19

More ABS Sheet settings

Same material on Aeon Laser MIRA 7. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)

P90 S171.5 mm/s · this one

Cut by thickness

1mm · P83 S15 mm/s 3mm · P83 S5 mm/s

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

LightBurn machine — exports as .clb, no retyping.

Test Grid Generator

A power × speed sweep with this setting (P90 · S171.5) in the center square — dial it in on scrap.

Machine Context

BrandAeon Laser

ModelMIRA 7

Laser typeCO2

Wattage60W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialABS Sheet

Provenance

Source type

Community report

Shared by a maker in the community. Helpful for context, but not verified for every setup.

License

CC0 (Public Domain)