Maker Foundry

Pick your machine

12 machines
D1
11 settings
D1 Pro
14 settings
D1 Pro 2.0
14 settings
F1
4 settings
F1 Lite
4 settings
F1 Ultra
3 settings
M1
6 settings
M1 Ultra
6 settings
M2
8 settings
P2
3 settings
P2S
4 settings
S1
13 settings
Cut · Flat Surface 1Engrave · Flat Surface 5Score · Flat Surface 2
1/4"(6mm) White oak plywood test grid
DiodeCommunity report

1/4"(6mm) White oak plywood

white

Shared by @Daxx on Atomm

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Cut · Vector · Flat Surface
Power
100
Speed
3
Passes
1
Thickness
4mm
M2 with 10W diode laser. 1 pass at 100% power and 3mm/s speed. This is for cutting just the stand. The ornament is a different, thinner wood. The tab depth and slot width were adjusted to account for the thicker board. An unintended, happy accident: I angled the two base pieces around the arm to minimize waste. It put the grain at an angle and when the pieces are stacked, it gives it a neat cross pattern.

More 1/4"(6mm) White oak plywood settings

Same material on xTool M2. Engrave stays the same regardless of thickness; cut changes with thickness.

Cut by thickness
4mm · P100 S3 · this one

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).

Sponsored
All American Print Supply

DTF and UV printers, supplies and xTool machines.

Code FOUNDRY: 5% off, machines included

Shop AAPS →

Machine Context

BrandxTool
ModelM2
Laser typeDiode
Wattage10W

Compare against your own machine before treating these as a starting point.

Material Details

Material1/4"(6mm) White oak plywood
Color / Finishwhite
BrandHobby Lobby
Size4mm
SupplierxTool
Buy this material →
Buy from xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Shop machine — xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Provenance

Source type
Community report

Shared by a maker in the community. Helpful for context, but not verified for every setup.

Source

Shared by @Daxx in Atomm, xTool's community
View the original post →