Maker Foundry

Pick your machine

6 machines
F2
2 settings
F2 Ultra UV
2 settings
M1
1 setting
M2
14 settings
P2S
3 settings
S1
1 setting
Cut · Flat Surface 4Engrave · Flat Surface 7Score · Flat Surface 3
Basswood test grid
DiodeCommunity report

Basswood

Shared by @sombrecieux on Atomm

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Cut · Vector · Flat Surface
Power
70
Speed
7
Passes
1
Thickness
1.5mm
5/50 coupe mais risque de fil de bois non coupé et lent 7/70 la plus propre sur la tranche on voit bien les couches de collage du contreplaqué 9/80 peu laisser de rares fibres de fil de bois si le produit n'est pas parfaitement plat, rapide 9/90 rapide pas aussi propre sur la tranche que 7/70 mais on court sur la plaque

More Basswood settings

Same material on xTool M2. Engrave stays the same regardless of thickness; cut changes with thickness.

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).

Sponsored
Shop xTool lasers and UV printers

Every xTool machine in this library, with our discount code.

Code ERIK100: $100 off $1,699+ (or ERIK80: $80 off $999+)

Shop xTool →

Machine Context

BrandxTool
ModelM2
Laser typeDiode
Wattage10W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialBasswood
Size1.5mm
SupplierxTool
Buy this material →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Shop machine — xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Provenance

Source type
Community report

Shared by a maker in the community. Helpful for context, but not verified for every setup.

Source

Shared by @sombrecieux in Atomm, xTool's community
View the original post →