Maker Foundry
Engrave · Flat Surface 2Score · Flat Surface 1
natural wood log slice test grid
DiodeCommunity report

natural wood log slice

Shared by @javier.calero191 on Atomm

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Engrave · Bitmap · Flat Surface
Power
50
Speed
140
Passes
1
Thickness
9.43mm
wood work on post hard wood, this is a pine wood slice power at 90 speed at 55 air assist at 0 min out power 8 it may vary on different machine, mine is a m2 laser and i had to run it twice to get a deeper color the strenght is at 55 when you edit the photo

More natural wood log slice settings

Same material on xTool M2. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)
9.43mm · P50 S140 · this one16.8mm · P59 S166

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).

Sponsored
All American Print Supply

DTF and UV printers, supplies and xTool machines.

Code FOUNDRY: 5% off, machines included

Shop AAPS →

Machine Context

BrandxTool
ModelM2
Laser typeDiode
Wattage10W

Compare against your own machine before treating these as a starting point.

Material Details

Materialnatural wood log slice
Size9.43mm
Shop machine — xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Provenance

Source type
Community report

Shared by a maker in the community. Helpful for context, but not verified for every setup.

Source

Shared by @javier.calero191 in Atomm, xTool's community
View the original post →