Deep Brown PU Leather test grid

DiodeCommunity report

Deep Brown PU Leather

brown

Shared by @Neurospice Designs on Atomm

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Engrave · Bitmap · Flat Surface

Power

13

Speed

247

LPC

120

Passes

1

Thickness

1.2mm

Laser engraved on an xTool S1 using a 1.2 mm brown synthetic leather patch. The engraving produced clean, high-contrast dark markings with crisp detail. After engraving, simply wipe away any loose dust or debris with a dry microfiber cloth or paper towel, then finish with a lightly damp paper towel to remove any remaining residue. Allow the patch to air dry for a few moments before handling or applying. No additional finishing or sealing was required.

More Deep Brown PU Leather settings

Same material on xTool S1. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)

1.2mm · P13 S247 · this oneP15 S165 P40 S140 3mm · P24 S340 3mm · P30 S400 1.2mm · P13 S250 P10 S400 P10 S400 P25 S250 P10 S200 P10 S230 P70 S140

Cut by thickness

3mm · P65 S130

Score

P10 S240 P40 S80 P50 S25 P10 S135 P30 S215 P20 S125

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).

Shop xTool lasers and UV printers

Every xTool machine in this library, with our discount code.

Code ERIK100: $100 off $1,699+ (or ERIK80: $80 off $999+)

Machine Context

BrandxTool

ModelS1

Laser typeDiode

Wattage20W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialDeep Brown PU Leather

Color / Finishbrown

Size1.2mm

SupplierxTool

Buy this material →

Buy from xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Shop machine — xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Provenance

Source type

Community report

Shared by a maker in the community. Helpful for context, but not verified for every setup.

Source

Shared by @Neurospice Designs in Atomm, xTool's community

View the original post →