DiodeCommunity report

1/8"(3mm) MDF Board

Shared by @martinstorm7878 on Atomm

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Cut · Vector · Flat Surface

Power

Speed

Passes

Thickness

3mm

I used the 3mm Mdf for the project and have some new settings for the cutting ariers witch has lowered from 85 powe and 15 speed to the new im using withch is 81 power and 14 speed. the first setting was good but then i tryed out thes new setting and it givs less Sud and less cleanup withch we like alto

More 1/8"(3mm) MDF Board settings

Same material on xTool S1. Engrave stays the same regardless of thickness; cut changes with thickness.

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).

Machine Context

BrandxTool

ModelS1

Laser typeDiode

Wattage40W

Compare against your own machine before treating these as a starting point.

Material Details

Material1/8"(3mm) MDF Board

Size3mm

SupplierxTool

Buy this material →

Buy from xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Shop machine — xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Provenance

Source type

Community report

Shared by a maker in the community. Helpful for context, but not verified for every setup.

Source

Shared by @martinstorm7878 in Atomm, xTool's community

View the original post →

Pick your machine