Pick your machine
7 machines have Cherry Wood settings
DiodeCommunity report
Cherry Wood
Shared by @docaud58 on Atomm
Important safety notice
Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.
Laser Settings
Emboss · Bitmap · EmbossmentPower
100
Speed
1500
LPC
150
Passes
1
Thickness
3mm
Settings for embossing cherry. I will set this for 256 layers. I use this for making stamps for clay. As different boards have different density, I will watch the burn and when the depth gets to what I need I will stop the process.
Community Feedback
No votes yet — be the first to report how these settings worked.
Export
xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).
Sponsored
All American Print Supply
DTF and UV printers, supplies and xTool machines.
Code FOUNDRY: 5% off, machines included
Shop AAPS →Machine Context
BrandxTool
ModelF1 Ultra
Laser typeDiode
Wattage20W
Compare against your own machine before treating these as a starting point.
Material Details
MaterialCherry Wood
Size3mm
SupplierxTool
Buy this material →
Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)
Shop machine — xTool →
Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)
Provenance
Source type
Community report
Shared by a maker in the community. Helpful for context, but not verified for every setup.