Maker Foundry

Pick your machine

16 machines
D1
9 settings
D1 Pro
12 settings
D1 Pro 2.0
12 settings
F1
5 settings
F1 Lite
4 settings
F1 Ultra
5 settings
F2
6 settings
F2 Ultra
3 settings
F2 Ultra UV
4 settings
M1
6 settings
M1 Ultra
6 settings
M2
7 settings
P2
3 settings
P2S
4 settings
P3
3 settings
S1
10 settings
Cut · Flat Surface 1Emboss · Embossment 1Engrave · Flat Surface 2Score · Flat Surface 1
Edible Oil Coated Beech Wood test grid
DiodeCommunity report

Edible Oil Coated Beech Wood

Shared by @marpallares on Atomm

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Cut · Vector · Flat Surface
Power
60
Speed
12
Passes
4
Thickness
3mm
3 mm solid beech wood cutting settings tested with a blue diode laser. These settings produced a clean, complete cut without triggering the flame detection. I also tested higher power and fewer passes, but this caused the wood to flame. Using lower power and multiple passes gave me a much cleaner and more reliable result.

More Edible Oil Coated Beech Wood settings

Same material on xTool F1 Ultra. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)
10mm · P75 S40010mm · P75 S?
Cut by thickness
3mm · P60 S12 · this one

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).

Sponsored
All American Print Supply

DTF and UV printers, supplies and xTool machines.

Code FOUNDRY: 5% off, machines included

Shop AAPS →

Machine Context

BrandxTool
ModelF1 Ultra
Laser typeDiode
Wattage20W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialEdible Oil Coated Beech Wood
Size3mm
SupplierxTool
Buy this material →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Shop machine — xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Provenance

Source type
Community report

Shared by a maker in the community. Helpful for context, but not verified for every setup.

Source

Shared by @marpallares in Atomm, xTool's community
View the original post →