Maker Foundry

Pick your machine

5 machines
D1 Pro
1 setting
F2 Ultra UV
3 settings
M2
1 setting
P2
3 settings
P2S
4 settings
5/32"(4mm) Glass High Temperature Glass test grid
DiodeCommunity report

5/32"(4mm) Glass High Temperature Glass

Shared by @Scott on Atomm

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Engrave · Vector · Flat Surface
Power
80
Speed
70
LPC
100
Passes
1
Thickness
4mm
I used black tempera paint from Wal-Mart using a 2-inch paint roller, and it spread smoothly across the glass surface with minimal streaks, providing even coverage. This required 4 coats.

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).

Sponsored
Shop xTool lasers and UV printers

Every xTool machine in this library, with our discount code.

Code ERIK100: $100 off $1,699+ (or ERIK80: $80 off $999+)

Shop xTool →

Machine Context

BrandxTool
ModelM2
Laser typeDiode
Wattage10W

Compare against your own machine before treating these as a starting point.

Material Details

Material5/32"(4mm) Glass High Temperature Glass
BrandHacaroa Tempered Glass Cutting Board
Size4mm
SupplierxTool
Buy this material →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Shop machine — xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Provenance

Source type
Community report

Shared by a maker in the community. Helpful for context, but not verified for every setup.

Source

Shared by @Scott in Atomm, xTool's community
View the original post →