Maker Foundry

Pick your machine

14 machines
D1
9 settings
D1 Pro
12 settings
D1 Pro 2.0
12 settings
F1
4 settings
F1 Lite
4 settings
F1 Ultra
8 settings
F2 Ultra UV
3 settings
M1
6 settings
M1 Ultra
6 settings
M2
6 settings
P2
3 settings
P2S
4 settings
P3
2 settings
S1
13 settings
1/2"(12mm) MDF test grid
CO2Community report

1/2"(12mm) MDF

brown

Shared by @sbowles on Atomm

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Cut · Vector · Flat Surface
Power
95
Speed
10
Passes
3
Thickness
10mm
Stepwise Descent Focus was used with 3 passes and (1,1,1) for the Focus change settings. Very charred on edges but it is cut

More 1/2"(12mm) MDF settings

Same material on xTool P3. Engrave stays the same regardless of thickness; cut changes with thickness.

Cut by thickness
10mm · P95 S10 · this one12mm · P95 S4

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).

Sponsored
All American Print Supply

DTF and UV printers, supplies and xTool machines.

Code FOUNDRY: 5% off, machines included

Shop AAPS →

Machine Context

BrandxTool
ModelP3
Laser typeCO2
Wattage80W

Compare against your own machine before treating these as a starting point.

Material Details

Material1/2"(12mm) MDF
Color / Finishbrown
Size10mm
SupplierxTool
Buy this material →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Shop machine — xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Provenance

Source type
Community report

Shared by a maker in the community. Helpful for context, but not verified for every setup.

Source

Shared by @sbowles in Atomm, xTool's community
View the original post →