Pick your machine

14 machines have Round Soda-Lime Glass Cup 9.8oz (290ml) settings

1 setting

DiodeCommunity report

Round Soda-Lime Glass Cup 9.8oz (290ml)

Shared by @Patrik Adolfsson on Atomm

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Engrave · Vector · Flat Surface

Power

Speed

150

LPC

140

Passes

Crosshatch

defocus

3 mm

Sharing the settings that produced this bright, detailed skull engraving on soda-lime whisky glass using the xTool F2 Ultra Dual, processed flat. Settings: * Process: Engrave * Laser: Blue Light Diode * Power: 70% * Speed: 150 mm/s * Passes: 1 * Lines per cm: 140 * Engraving mode: Uni-directional * Defocus: Off * Engraving angle: 0° incremental * Cross hatch: On Defocus +2mm upwards Different glass types and coatings may react differently, so use these settings as a starting point and run a small test first.

More Round Soda-Lime Glass Cup 9.8oz (290ml) settings

Same material on xTool F2 Ultra. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)

P70 S150 · this oneP90 S100 P90 S200

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).

Machine Context

BrandxTool

ModelF2 Ultra

Laser typeDiode

Wattage40W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialRound Soda-Lime Glass Cup 9.8oz (290ml)

Shop machine — xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Provenance

Source type

Community report

Shared by a maker in the community. Helpful for context, but not verified for every setup.

Source

Shared by @Patrik Adolfsson in Atomm, xTool's community

View the original post →