CO2Supplier reference
Birch Ply 10mm
Shared by Supplier Import
Important safety notice
Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.
Laser Settings
Cut · VectorPower
90
Speed
13 mm/s
Thickness
10mm
Lens
2"
min power
10%
air assist
high
More Birch Ply settings
Same material on OneLaser 100W CO2. Engrave stays the same regardless of thickness; cut changes with thickness.
Engrave (any thickness)
Cut by thickness
3mm · P90 S52 mm/s6mm · P90 S20 mm/s10mm · P90 S13 mm/s · this one15mm · P90 S2 mm/s18mm · P90 S1 mm/s
Community Feedback
No votes yet — be the first to report how these settings worked.
Test Grid Generator
A power × speed sweep with this setting (P90 · S13) in the center square — dial it in on scrap.
Machine Context
BrandOneLaser
Model100W CO2
Laser typeCO2
Wattage100W
Compare against your own machine before treating these as a starting point.
Provenance
Source type
Supplier reference
Shared from a supplier or manufacturer reference. Useful for context, but not proof it will match your machine or material.
License
CC0 (Public Domain)
No rights reserved, free to use.