Pick your machine

17 machines have 1/8"(3mm) Basswood Plywood settings

Cut · Flat Surface 6 Engrave · Flat Surface 12 Score · Flat Surface 6

1/8"(3mm) Basswood Plywood test grid

DiodeCommunity report

1/8"(3mm) Basswood Plywood

Shared by @l.doolin72 on Atomm

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Score · Vector · Flat Surface

Power

90

Speed

25

Passes

1

Thickness

3mm

I turn off air assist while scoring so it will have a darker, cleaner look. I turn air assist back on for the cutting, which is 100% power and speed set at 3, one pass.

More 1/8"(3mm) Basswood Plywood settings

Same material on xTool D1 Pro. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)

3mm · P75 S120 3mm · P55 S80 6mm · P80 S250 P80 S200

Cut by thickness

3mm · P100 S10 3mm · P100 S2

Score

3mm · P90 S25 · this one3mm · P100 S35

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).

All American Print Supply

DTF and UV printers, supplies and xTool machines.

Code FOUNDRY: 5% off, machines included

Machine Context

BrandxTool

ModelD1 Pro

Laser typeDiode

Wattage10W

Compare against your own machine before treating these as a starting point.

Material Details

Material1/8"(3mm) Basswood Plywood

Size3mm

SupplierxTool

Buy this material →

Buy from xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Shop machine — xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Provenance

Source type

Community report

Shared by a maker in the community. Helpful for context, but not verified for every setup.

Source

Shared by @l.doolin72 in Atomm, xTool's community

View the original post →