Maker Foundry

Pick your machine

17 machines
D1
9 settings
D1 Pro
12 settings
D1 Pro 2.0
12 settings
F1
5 settings
F1 Lite
5 settings
F1 Ultra
6 settings
F2
9 settings
F2 Ultra
4 settings
F2 Ultra UV
3 settings
M1
7 settings
M1 Ultra
6 settings
M2
21 settings
P2
4 settings
P2S
4 settings
P3
4 settings
S1
21 settings
X1
11 settings
Engrave · Flat Surface 4Engrave · Pass-Through 1Score · Flat Surface 2
Round Cork Coasters test grid
DiodeCommunity report

Round Cork Coasters

brown

Shared by @landscape.inspired on Atomm

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Engrave · Bitmap · Pass-Through
Power
30
Speed
250
LPC
100
Passes
1
Thickness
3mm
Used a 10W M1 diode laser to engrave this cork coaster with a ballpoint image of an otter holding a ball. Smoke purifier and air assist were on during the engraving. Coaster was engraved on honeycomb bed and held down with magnetic pins so it wouldn't fly away due to the air assist.

More Round Cork Coasters settings

Same material on xTool M1. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)
3mm · P30 S250 · this one5mm · P45 S2505mm · P30 S1405mm · P30 S2505mm · P60 S140

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).

Sponsored
Shop xTool lasers and UV printers

Every xTool machine in this library, with our discount code.

Code ERIK100: $100 off $1,699+ (or ERIK80: $80 off $999+)

Shop xTool →

Machine Context

BrandxTool
ModelM1
Laser typeDiode
Wattage10W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialRound Cork Coasters
Color / Finishbrown
Size3mm
SupplierxTool
Buy this material →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Shop machine — xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Provenance

Source type
Community report

Shared by a maker in the community. Helpful for context, but not verified for every setup.

Source

Shared by @landscape.inspired in Atomm, xTool's community
View the original post →