CO2Maker Foundry
Hard Wood - 1/8
Cherry 1/8 Cut
Shared by Maker Foundry
Important safety notice
Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.
Laser Settings
Cut · Vector · Flat SurfacePower
70
Speed
10
Frequency
1000
Pulse Width
18
Thickness
1/8 in
Cherry 1/8 Cut | LinkPath: 55w RF/Hard Wood/Cherry 1/8 Cut
More Hard Wood settings
Same material on Thunder Laser Bolt Pro 55. Engrave stays the same regardless of thickness; cut changes with thickness.
Community Feedback
No votes yet — be the first to report how these settings worked.
Test Grid Generator
A power × speed sweep with this setting (P70 · S10) in the center square — dial it in on scrap.
Machine Context
BrandThunder Laser
ModelBolt Pro 55
Laser typeCO2
Wattage55W
Compare against your own machine before treating these as a starting point.
Material Details
MaterialHard Wood - 1/8
Color / FinishCherry 1/8 Cut
Size1/8 in
Provenance
Source type
Maker Foundry
Shared by Maker Foundry. A starting point — test on scrap before your final piece, as your machine and material may differ.
License
CC0 (Public Domain)
No rights reserved, free to use.