CO2Maker Foundry

Hard Wood

Cherry Photo Engrave

Shared by Maker Foundry

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Engrave · Bitmap · Flat Surface

Power

Speed

300

DPI

1400

Frequency

10000

Cherry Photo Engrave | Dither Mode = jarvis | LinkPath: 55w RF/Hard Wood/Cherry Photo Engrave

More Hard Wood settings

Same material on Thunder Laser Bolt Pro 55. Engrave stays the same regardless of thickness; cut changes with thickness.

Engrave (any thickness)

P8 S300 · this oneP40 S500 P60 S300 P50 S300 P20 S100 P44 S700

Cut by thickness

1/8 in · P70 S10

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

LightBurn machine — exports as .clb, no retyping.

Test Grid Generator

A power × speed sweep with this setting (P8 · S300) in the center square — dial it in on scrap.

Machine Context

BrandThunder Laser

ModelBolt Pro 55

Laser typeCO2

Wattage55W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialHard Wood

Color / FinishCherry Photo Engrave

Provenance

Source type

Maker Foundry

Shared by Maker Foundry. A starting point — test on scrap before your final piece, as your machine and material may differ.

License

CC0 (Public Domain)