Pick your machine
3 machines have Powder-Coated Metal settingsCO2Vendor
Powder-Coated Metal
Shared by Supplier Import
Important safety notice
Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.
Laser Settings
Engrave · BitmapPower
15
Speed
325 mm/s
Line Interval
.065
Community Feedback
No votes yet — be the first to report how these settings worked.
Export
LightBurn machine — exports as .clb, no retyping.
Sponsored
All American Print Supply
DTF and UV printers, supplies and xTool machines.
Code FOUNDRY: 5% off, machines included
Shop AAPS →Test Grid Generator
A power × speed sweep with this setting (P15 · S325) in the center square — dial it in on scrap.
Machine Context
BrandBoss Laser
Model155W CO2
Laser typeCO2
Wattage155W
Compare against your own machine before treating these as a starting point.
Material Details
MaterialPowder-Coated Metal
Provenance
Source type
Vendor
Shared from a supplier or manufacturer reference. Useful for context, but not proof it will match your machine or material.
License
CC0 (Public Domain)
No rights reserved, free to use.