Maker Foundry

Pick your machine

13 machines
D1
9 settings
D1 Pro
12 settings
D1 Pro 2.0
12 settings
F1
4 settings
F1 Lite
4 settings
F1 Ultra
4 settings
F2 Ultra
1 setting
M1
6 settings
M1 Ultra
7 settings
M2
7 settings
P2
3 settings
P2S
3 settings
S1
11 settings
Varnished Teak test grid
DiodeCommunity report

Varnished Teak

Shared by @G1001000 on Atomm

Important safety notice

Settings are starting points — always run a test cut on scrap before your final piece. Follow your manufacturer's guidance, wear eye protection, and ensure proper ventilation.

Laser Settings

Engrave · Vector · Flat Surface
Power
40
Speed
1100
LPC
150
Passes
1
Crosshatch
On
Thickness
17.5mm
defocus
3 mm
F2 Ultra on Teak wood. Settings: Blue light, 40% power, 1100 mm/s, 1 pass, 150 lines/cm, Bi-directional, and cross hatch enabled.

Community Feedback

No votes yet — be the first to report how these settings worked.

Export

xTool machine: open it straight in xTool Studio, or download a .mxs (Studio → Materials → Import).

Sponsored
Shop xTool lasers and UV printers

Every xTool machine in this library, with our discount code.

Code ERIK100: $100 off $1,699+ (or ERIK80: $80 off $999+)

Shop xTool →

Machine Context

BrandxTool
ModelF2 Ultra
Laser typeDiode
Wattage40W

Compare against your own machine before treating these as a starting point.

Material Details

MaterialVarnished Teak
Size17.5mm
SupplierxTool
Buy this material →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Shop machine — xTool →

Code ERIK100 — $100 off $1,699+ (or ERIK80 — $80 off $999+)

Provenance

Source type
Community report

Shared by a maker in the community. Helpful for context, but not verified for every setup.

Source

Shared by @G1001000 in Atomm, xTool's community
View the original post →